BULLDOZER
Model No.: TY160
MAIN FEATURES:
1. Introduced Komatsu D65A-8 bulldozer technology, featuring highperformance capacity, efficiency, safe and reliable in operation.
2. Widely used in buildinginfrastructure and industry including large mining area, port, power plant,road building etc.
3. Optional attachments: straight-tiltblade, angle blade, U-blade, Rops cab, canopy, 3-shank ripper, air conditioner,510mm track shoes, 610mm track shoes.
MAINPARAMETERS:
SPECIFICATION:
Operating Weight: Straight-tilt: 17400kg; Angle: 17700kg; U-Blade: 17900kg;
Min. Ground Clearance: Straight-tilt: 400mm; Angle: 400kg; U-Blade: 400kg;
Min. Turning Radius: Straight-tilt: 3.2m; Angle: 3.2m; U-Blade: 3.2m;
Ground Pressure: Straight-tilt: 0.069MPa;Angle: 0.070MPa; U-Blade: 0.071MPa;
Track Gauge: Straight-tilt: 1880mm; Angle: 1880mm; U-Blade: 1880mm;
Max. Pulling Force: Straight-tilt: 142KN;Angle: 142KN; U-Blade: 142KN;
Grade Ability: Straight-tilt: 30 degree;Angle: 30 degree; U-Blade: 30 degree;
TRAVELSPEED:
Forward: I: 0-3.8 km/h; II: 0-6.6 km/h; III: 0-10.6 km/h;
Reverse: I: 0-4.9 km/h; II: 0-8.5 km/h; III: 0-13.6 km/h;
ENGINE:
Model & Type: CumminsNT855-C280S10/ Shangchai C6121ZG57/ Weichai WD10G175E15, 6-cylinder, in-line, vertical, water-cooled,4-stroke-cycle, turbo-charged, over valve directs injection.
Rated Revolution: 1850 rpm
Flywheel Horsepower: 160 HP (120 kW)/1850rpm
Cylinder Number-Bore x Stroke: Cummins: 6-139.7x 152.4mm;Shangchai: 6-120.6 x 152.4mm;Weichai: 6-126 x 130mm
Piston Displacement: Cummins:14L; Shangchai: 10.5L; Weichai:9.73L
Min. Fuel Consumption: Cummins: 212g/kWh; Shangchai: 223g/kWh; Weichai: 223g/kWh
Max. Torque: Cummins: 877/1250Nm/rpm; Shangchai: 830/1100 Nm/rpm;Weichai: 830/1100 Nm/rpm
Starting Method: Starting motor 24 V 7.5kW
POWERTRANSMISSION SYSTEM:
Torque Converter:3-element, 1-stage, 1-phase
Transmission: Planetarygear, multi-disc clutch, hydraulically connected, forced lubrication, 3 forwardand 3 reverse speeds.
Bevel Gear: Spiral bevelgear, splash lubrication, single-stage speed reduction.
Steering Clutch: Wet,multi-disc, spring loaded, hydraulically separated, hydraulic control
Steering Brake: Wet,floating, direct on-off hydraulic inter-linking operation
Final Drive: Double reduction of spurgear, splash lubrication
HYDRAULICSYSTEM:
Pump Type: Gear pump 07441-67503
Working Pressure: 13.4 MPa
System Discharge: 250 (at revolutionof 1850 rpm) L/min
Working Cylinder type: Double-actingpiston type
Working Cylinder Lift Number-Bore xRod x Stroke: 2-110 x 65 x 1026 mm
Working Cylinder Tilt Bore x Rod xStroke: 160 x 70 x 140 mm
UNDERCARRIAGESYSTEM:
Type: Swing type of sprayed beam,suspended structure of equalizer bar
Carrier Rollers: 2 (each side)
Track Rollers: 6/each side (4-singleflange, 2-double flange)
Track type: Sealed, assembled single -grouser
Number Of Track Shoes: 37 (each side)
Width Of Track Shoes: 510 mm
Pitch: 203.2 mm
Length Of Track On Ground: 2430 mm
WORKEQUIPMENT:
Blade Capacity:Straight-tilt: 4.5 cubic meter; Angle: 4.3 cubic meter; U-Blade: 8.6 cubicmeter;
Blade Width x Height: Straight-tilt:3416x1145mm;Angle: 3970x1037mm;U-Blade: 4046x1386mm;
Max. Lift: Straight-tilt: 1110mm; Angle: 1095mm; U-Blade: 1095mm;
Max. Depth: Straight-tilt: 530mm; Angle: 545mm; U-Blade: 545mm;
Max. Tilt Adjustment:Straight-tilt: ≧860 mm;Angle: ≧400 mm; U-Blade: ≧400 mm
Pitch Adjustment:Straight-tilt: 55 degree; Angle: 55 degree; U-Blade: 55 degree
Capability (Theoreticalvalue 40m):Straight-tilt: 247 cubic meter/h; Angle: 247 cubic meter/h; U-Blade: 260 cubicmeter/h
Weight Of Blade: Straight-tilt:2350 kg; Angle: 2450 kg; U-Blade: 2560 kg
COOLANTAND LUBRICANT CAPACITY:
Fuel Tank Capacity: 320 L
Hydraulic Tank Capacity: 108 L
Engine Oil Capacity: 45 L
Torque Converter, Transmission, BevelGear, Steering Clutch Capacity: 122 L
Final Drive Capacity (each side): 33 L
RIPPER(OPTIONAL):
3-ShankRipper:
Max. Digging Depth: 572 mm
Max. Lift: 7025 mm
Shank Of Distance: 950 mm
Weight: 1700 kg
OVERALLDIMENSIONS:
Overall length: 5230 mm
Overall length (ripper): 6530 mm
Overall width: 3416 mm
Overall height: 3130 mm
