STANDARDCONFIGURATION:
TY220S crawler swamp bulldozer:
HYDRAULIC DRIVEN, CHONGQING-CUMMINSDIESEL ENGINE (220HP), 7.7M3 STRAIGHT-TILT BLADE, HEXAGONAL CABIN WITH A/C,WITH SWAMP TRACK SHOES.
Model | TY220S |
Engine | Model | CUMMINS NT855-C280S10 |
Rated power/speed | 220HP/1800rmp |
Fuel consumption | 212g / kw. h |
Performance Parameters | Operation weight | 25700kg |
Land pressure | 0.039kpa |
Min. ground clearance | 405mm |
Min. turning Radius | 3.8m |
Grade ability | 30° |
Running System | Width of Track Shoes | 945mm |
Track centers | 2250mm |
Length of Track On Ground | 3480mm |
Working Equipment | Blade Type | straight-tilting blade |
Blade Capacity | 7.7m³ |
Bulldozer width | 4365mm |
Bulldozer height | 1330mm |
Blade max lifting height | 1330mm |
Blade max digging depth | 550mm |
Overall Dimensions | Overall length | 6060mm |
Overall width | 4365mm |
Overall height | 3440mm |
BULLDOZER
Model No.: TY220S
MAIN FEATURES:
1. Manufactured by adoptingthe technology of Komatsu D85A-18bulldozer, featuring high performance capacity, efficiency, safe and reliablein operation.
2. Taking the advantage oflower ground pressure and suitable to be used in swamp and soft landapplication.
3. Various options: airconditioner.
MAINPARAMETERS:
SPECIFICATION:
Operating Weight: Straight-tilt: 25700kg;
Min. Ground Clearance: Straight-tilt: 405mm
Min. Turning Radius: Straight-tilt: 3.8m;
Ground Pressure: Straight-tilt: 0.039MPa;
Track Gauge: Straight-tilt: 2250mm;
Max. Pulling Force: Straight-tilt: 221KN;
Grade Ability: Straight-tilt: 30 degree;
TRAVELSPEED:
Forward: I: 0-3.6 km/h; II: 0-6.5 km/h; III: 0-11.2 km/h;
Reverse: I: 0-4.3 km/h; II: 0-7.7 km/h; III: 0-13.2 km/h;
ENGINE:
Model & Type: CumminsNT855-C280S10 6-cylinder, in-line, 4-stroke-cycle, water-cooled, overhead valvedirect injection, turbocharged diesel
Rated Revolution: 1800 rpm
Flywheel Horsepower: 220 HP (162 kW)/1800rpm
Cylinder Number-Bore x Stroke: 6-139.7 x 152.4mm;
Piston Displacement: 14L;
Min. Fuel Consumption: 212g/kWh;
Max. Torque: 1078/1250Nm/rpm;
Starting Method: Starting motor 24 V 11kW
POWERTRANSMISSION SYSTEM:
Torque Converter:3-element, 1-stage, 1-phase
Transmission: Planetarygear, multi-disc clutch, hydraulically connected, forced lubrication, 3 forwardand 3 reverse speeds.
Bevel Gear: Spiral bevelgear, splash lubrication, single-stage speed reduction.
Steering Clutch: Wet,multi-disc, spring loaded, hydraulically separated, hydraulic control
Steering Brake: Wet,floating, direct on-off hydraulic inter-linking operation
Final Drive: Double reduction of spurgear, splash lubrication
HYDRAULICSYSTEM:
Pump Type: Gear pump 07441-67503
Working Pressure: 14 MPa
System Discharge: 262 (at revolutionof 1800 rpm) L/min
Working Cylinder type: Double-actingpiston type
Working Cylinder Lift Number-Bore xRod x Stroke: 2-120 x 70 x 1043 mm
Working Cylinder Tilt Bore x Rod xStroke: 200 x 90 x 130 mm
UNDERCARRIAGESYSTEM:
Type: Swing type of sprayed beam,suspended structure of equalizer bar
Carrier Rollers: 2 (each side)
Track Rollers: 8/each side (5-singleflange, 3-double flange)
Track type: Sealed, assembled single -grouser
Number Of Track Shoes: 45 (each side)
Width Of Track Shoes: 945 mm
Pitch: 216 mm
Length Of Track On Ground: 3480 mm
WORKEQUIPMENT:
Blade Capacity:Straight-tilt: 7.7 cubic meter;
Blade Width x Height: Straight-tilt:4365x1330mm;
Max. Lift: Straight-tilt: 1330mm;
Max. Depth: Straight-tilt: 550mm;
Max. Tilt Adjustment:Straight-tilt: ≧735 mm;
Pitch Adjustment:Straight-tilt: 55 degree;
Capability (Theoreticalvalue 40m): Straight-tilt: 330cubic meter/h;
Weight Of Blade: Straight-tilt:3820 kg;
COOLANTAND LUBRICANT CAPACITY:
Fuel Tank Capacity: 480 L
Hydraulic Tank Capacity: 110 L
Engine Oil Capacity: 45 L
Torque Converter, Transmission, BevelGear, Steering Clutch Capacity: 122 L
Final Drive Capacity (each side): 72 L
OVERALLDIMENSIONS:
Overall length: 6060 mm
Overall width: 4365 mm
Overall height: 3440 mm